当前位置：首页>专业技术>搬运仓储

专业技术

TECHNOLOGY
搬运仓储
搬运仓储安装视频技术参数

MOVEMENT 

During manual movement and installation of “ULTRA” slabs, to protect operators' safety and ensure the integrity of the slabs, we strongly recommend using a movement frame with suction cups and a trolley for movement, available on request, especially when working with particularly large “ULTRA” slabs (such as 300x150 cm – 150x150 cm). 

 

EQUIPMENT REQUIRED :

The equipment required to lift and move slabs must be chosen from the list below, according to the size of the slab and the work to be performed on the site:

  • Forklift with 1.5 m long forks.
  • Movement frame with suction cups and wheeled trolley for movement
  • Two-way suction cups for movement of slabs measuring up to 100x100 cm.:

STEPS:

  • Remove the cover of the crate.
  • Position the movement frame on the slab with safety suction cups, making sure that they adhere perfectly, and checking that the arrow in the pressure gauge is beyond the red area.
  • To move slabs horizontally (on the level), use the handling frame with suction cups to put the slab in a vertical position and place on the wheeled trolley to be moved.
 

STORAGE：

Correct pallet movement requires use of a forklift with forks at least 1.5 m long, positioned at their maximum width. Under normal conditions, forks should be placed in the centre of the long side of the pallet, as they must support the entire depth of the pallet. To permit easy, safe removal of slabs, we recommend positioning pallets in an appropriate area where the forklift has room to move around on all sides of the pallet.

 

搬运岩板：

在手动移动和安装超大尺寸岩板的过程中，为了保护操作员的安全并确保岩板的完整性，我们强烈建议使用带有吸盘的移动架和移动小车，尤其是在使用特别大的岩板（如300x150 cm–300x100 cm）时。
 

 

所需设备：

根据板的尺寸和现场施工，必须从以下列表中选择提升和移动板所需的设备：

配有1.5米长叉的叉车。

带吸盘的移动框架和用于移动的轮式小车。

用于移动100x100 cm厚板材的双向吸盘。

步骤：

拆下板条箱盖。

用安全吸盘将移动框架放置在板上，确保它们完全粘附，并检查压力表中的箭头是否超出红色区域。

要水平移动板坯（在水平面上），使用带吸盘的操作架将板坯放置在垂直位置，并放置在要移动的轮式小车上。

 

储存：

正确的托盘移动需要使用叉车，叉车的叉长至少为1.5 m，位于其最大宽度处。正常情况下，货叉应放置在托盘长边的中心，因为它们必须支撑托盘的整个深度。为了方便、安全地拆除板材，我们建议将托盘放置在叉车有空间在托盘四周移动的适当区域。